10% Polyimide Filled PTFE Rod

Kaxite Sealing's 10% Polyimide Filled PTFE Rod offers exceptional wear resistance and low friction.

Send Inquiry

Product Description

What is 10% Polyimide Filled PTFE Rod?

10% polyimide filled PTFE rod is made from PTFE using a modification of 10% Polyimide. 10% polyimide filled PTFE rod has low wear rates and low coefficient of friction and it is used in seal components for static and dynamic applications where resistance to high pressure and temperature is key.

10% polyimide filled PTFE rod exhibits low friction and minimal wear in rotary and reciprocating sealing applications. It performs well against soft mating surfaces such as aluminum, mild steel, brass, and plastics, and it is ideal for use in stop-start applications where the goal is to eliminate stick-slip. This material is suggested for use in applications with service temperatures ranging from -240 °C to 287 °C.

Ideal applications for polyimide-filled PTFE

10% polyimide filled PTFE rod is used for self-lubricating bearings, compressor rings, piston ring seals, Big-billet. It is also good for high Temperature and high pressure. 10% polyimide filled PTFE rod has extremely low friction and are non-abrasive, making them ideal for applications involving softer mating surfaces such as steel, aluminum or other plastics. Therefore, polyimide-filled PTFE rod is particularly suitable for dry operation and start-stop applications. However, polyimide is an expensive PTFE filler, so you need to consider the cost when choosing it.

Advantages

10% polyimide filled PTFE rod has the characteristics of high wear resistance, high and low temperature resistance, self-lubricating, low noise, stable size, and not easy to damage to abrasive objects.

Properties of 10% Polyimide Filled PTFE Rod

Properties	Test Methods	Typical Value	Test Unit
Density	ASTM D792	2.03	g/cm3
Hardness shore D	ASTM D2240	65	Sh.D
Tensile strength	ASTM D4745	18.8	Mpa
Elongation at break 23°C	ASTM D4745	270	%
Coefficient of dynamic friction	ASTM D1894	0.05	-
Dielectric strength	ASTM D149	-	Kv/mm
Water absorption Max	ASTM D570	0	%
Working temperature	-	-200 to 260	°C

Hot Tags: 10% Polyimide Filled PTFE Rod, Polyimide Filled PTFE Rod Supplier, PTFE Rod with Polyimide Filler

Related Category

Product Tag

Send Inquiry

Contact Info



Address

No. 432, Zhenhai Middle Road, Luotuo Street, Zhenhai District, Ningbo City, Zhejiang China


Tel

0086-574-87527771


E-mail

[email protected]

If you have any inquiry about quotation or cooperation, please feel free to email us. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

News Recommendations