25% Glass Fiber Filled PTFE Rod

Kaxite Sealing's 25% Glass Fiber Filled PTFE Rod delivers superior strength, low friction, and wear resistance for demanding seals and bearings.

Send Inquiry

Product Description

What is 25% Glass Fiber Filled PTFE Rod?

Glass fiber it is the most common PTFE filler and it can increase the wear and creep resistance of PTFE. 25% glass fiber filled PTFE rod material can be used in oxidizing environments, but be aware that glass fiber reacts with HF and strong bases.

25% glass fiber filled PTFE rod material has a slightly higher coefficient of friction but better extrusion resistance than Glass fiber amd Moly filled PTFE materials. They are typically used in seal components for dynamic applications. 25% glass fiber filled PTFE rod also prefers a lubricated environment and are used to seal against steel, stainless steel, and chromium-plated surfaces.

Glass Fiber Filled PTFE Grades

GL7504 - 4% Fiberglass Filled PTFE Rod
GL7505 - 5% Fiberglass Filled PTFE Rod
GL7510 - 10% Fiberglass Filled PTFE Rod
GL7515- 15% Fiberglass Filled PTFE Rod
GL7520 - 20% Fiberglass Filled PTFE Rod
GL7525 - 25% Fiberglass Filled PTFE Rod
GL7515- 15% Fiberglass Filled PTFE Rod
GL7520 - 20% Fiberglass Filled PTFE Rod

Glass Fiber Filled PTFE Properties

• Glass Fiber PTFE has an exceptional resistance to water.
• Chemically Inert (Exceptions in HF and Strong Bases)
• Performs well in oxidizing environments
• Increases wear and creep resistance

Weakness

25% glass fiber filled PTFE rod must be avoided with the use of strong alkalis and hydrofluoric acid.

Typical Applications

• Ideal for high load bearing applications, against high hardness surfaces.
• Cookware coatings and rotating platforms
• Containers and pipelines for chemicals
• Bearings and bearing pads
• Valve seats and valve plugs
• Machinery lubricant
• Piston rings
• Wear Pads
• Gaskets

25% Glass Fiber Filled PTFE Rod Properties

Properties	Test Methods	Typical Value	Test Unit
Density	ASTM D792	2.24	g/cm3
Hardness shore D	ASTM D2240	≥ 55	Sh.D
Tensile strength	ASTM D4894	18 - 21	Mpa
Elongation at break 23°C	ASTM D4894	210	%
Coefficient of dynamic friction	ASTM D1894	0.15	-
Flammability	UL 94	V-0	-
Thermal conductivity 23°C	DIN 52612	0.43	W/K.m
Water absorption Max	ASTM D570	0.014	%
Working temperature	-	-200 to 260	°C

Hot Tags: 25% glass fiber filled PTFE rod, glass filled PTFE rod supplier, PTFE rod wholesale

Related Category

Product Tag

Send Inquiry

Contact Info



Address

No. 432, Zhenhai Middle Road, Luotuo Street, Zhenhai District, Ningbo City, Zhejiang China


Tel

0086-574-87527771


E-mail

[email protected]

If you have any inquiry about quotation or cooperation, please feel free to email us. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

News Recommendations