10% Carbon Filled PTFE Bushing

10% Carbon Filled PTFE Bushing by Kaxite Sealing offers self-lubricating, wear-resistant reliability.

Send Inquiry

Product Description

What is 10% Carbon Filled PTFE Bush?

10% carbon filled PTFE bush has less thermal expansion, higher wear resistance, less deformation under load properties compared to virgin PTFE. Carbon filled PTFE has excellent mechanical and wear properties, retains the excellent frictional properties and 10% carbon filled PTFE bush is an excellent choice for seals and rings in dynamic and high pressure applications.

Advantages and Benefits

10% carbon filled PTFE bush has Improved thermal dimensional stability, Improved creep resistance, Improved compression strength, Good cold flow reduction. It also has exceptional temperature resistance, Excellent chemical stability, Good thermal and electrical conductivity, Excellent wear resistance, Excellent resistance to abrasion and Improved surface hardness

Service Temperature

10% carbon filled PTFE bush has a continuous service temperature range from -100° C (-148° F ) to 250° C (482° F). For limited periods, 10% carbon filled PTFE bush is capable of sustaining even higher temperatures. Additionally, 10% carbon filled PTFE bush is capable of satisfactory performance at temperatures down to -200° C (-328° F).

Chemical Resistance

10% carbon filled PTFE bush is inert to nearly all known chemicals except for elemental alkali metals, chlorine trifluoride, and elemental fluorine at high temperature and pressures.

Solvent Resistance

10% carbon filled PTFE bush has insoluble properties in all solvents up to temperatures as high as 300° C (572° F). Certain highly fluorinated oils swell and dissolve PTFE at temperatures close to the crystalline melting point.

10% Carbon Filled PTFE Bush Properties

Properties	Test Methods	Typical Value	Test Unit
Density	ASTM D792	2.19	g/cm3
Hardness shore D	ASTM D2240	62	Sh.D
Tensile strength	ASTM D638	15	Mpa
Elongation at break 23°C	ASTM D4894	230	%
Coefficient of dynamic friction	ASTM D1894	0.13	-
Dielectric strength	ASTM D149	-	Kv/mm
Water absorption Max	ASTM D570	0	%
Working temperature	-	-200 to 260	°C

Hot Tags:

Related Category

Product Tag

Send Inquiry

Contact Info



Address

No. 432, Zhenhai Middle Road, Luotuo Street, Zhenhai District, Ningbo City, Zhejiang China


Tel

0086-574-87527771


E-mail

[email protected]

If you have any inquiry about quotation or cooperation, please feel free to email us. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

News Recommendations