60% Bronze Filled PTFE Tube

Kaxite Sealing 60% Bronze Filled PTFE Tube: excellent wear resistance, thermal conductivity, low friction for seals.

Send Inquiry

Product Description

What is 60% Bronze Filled PTFE Tube?

60% bronze filled PTFE tube is a filled compound based on Virgin PTFE containing 60% Bronze for Ram Extrusion, Compression and Isostatic moulding. It is preferred for parts and components requiring very good mechanical properties. 60% bronze filled PTFE tube offers an excellent combination of properties typical of fluoropolymer resins.

60% Bronze Filled PTFE Tube China

Product Advantages:

• Improved thermal dimensional stability
• Exceptional temperature resistance
• Improved deformation under load
• Improved compression strength
• High resistance to abrasion
• Improved surface hardness
• Reduced friction and wear
• High thermal conductivity
• Good chemical stability
• Low friction

Typical Application.

60% bronze filled PTFE tube offers excellent properties in the chemical processing, in automotive industries, in sealing application and in mechanical applications in general for bushing, sliding pads, for slide ways for machine tools, piston rings, compressors, pumps, hydraulics presses. High wear, abrasion resistance and good wear compression properties are suitable for the majority of dry bearing applications against hard counter-surfaces.

60% bronze filled PTFE tube is commonly used filler for dynamic seal applications requiring high wear resistance under strong compression but where high chemical resistance is not required. Large quantities of bronze reduce deformation under load and raise the thermal and electrical conductivity of PTFE compound. These two characteristics are beneficial to applications where a part is subjected to load at extreme temperatures

60% Bronze Filled PTFE Tube Properties

Properties	Test Methods	Typical Value	Test Unit
Density	ASTM D795	3.8	g/cm3
Hardness shore D	ASTM D2240	67	Sh.D
Tensile strength	ASTM D638	18	Mpa
Elongation at break 23°C	ASTM D638	260	%
Coefficient of dynamic friction	ASTM D1894	0.09	-
Dielectric strength	ASTM D149	-	Kv/mm
Water absorption Max	ASTM D570	0	%
Working temperature	-	-200 to 260	°C

Hot Tags: Bronze Filled PTFE Tube, 60% Bronze PTFE Tube, PTFE Bronze Tube

Related Category

Product Tag

Send Inquiry

Contact Info



Address

No. 432, Zhenhai Middle Road, Luotuo Street, Zhenhai District, Ningbo City, Zhejiang China


Tel

0086-574-87527771


E-mail

[email protected]

If you have any inquiry about quotation or cooperation, please feel free to email us. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

News Recommendations