10% graphite filled PTFE tube is made of 10% graphite powder blended with 90% PTFE. Graphite has self-lubricating properties which reduce friction. It is generally used in combination with glass or carbon or both. It has good wear resistance due to its flaky form.
10% graphite filled PTFE tube combines the excellent chemical resistance, low coefficient of friction, and extreme temperature range of virgin PTFE with a graphite filler providing additional strength and stability. The filler produces a lower coefficient of friction making it a great wear choice for dynamic components.
10% graphite filled PTFE tube has good chemically inert, excellent impact resistance, low coefficient of Friction, low moisture absorption and outstanding dielectric properties. It has Lower friction than PTFE in aqueous media.
10% graphite filled PTFE tube is suitable for use in aqueous media and can be used for bearings, bushings, connectors, insulators, packings, piston rings, pump wear rings, rollers, seals, slides, valves, washers.
|
Properties |
Test Methods |
Typical Value |
Test Unit |
| Density |
ASTM D792 |
2.12 |
g/cm3 |
| Hardness shore D | ASTM D2240 | 61 |
Sh.D |
|
Tensile strength |
ASTM D638 |
17.8 | Mpa |
| Elongation at break 23°C |
ASTM D638 |
180 |
% |
| Coefficient of dynamic friction | ASTM D1894 | 0.13 |
- |
| Water Absorption (Max.) | ASTM D570 | 0 | % |
| Working temperature | - | -200 to 260 | °C |
Address
No. 432, Zhenhai Middle Road, Luotuo Street, Zhenhai District, Ningbo City, Zhejiang China
